After logging into your campaign, select either the "Walk" button in the lower left corner of your app home screen, or select the "Menu" (the three hash marks) in the upper right hand corner, then select the "Walklist" icon with the two shoe prints and "Walklist" in text under them.
Either option will load the Walklist Page.
The Assigned Walklists will display, with the default selected for Map View, and the distance to the walk lists displaying if your GPS location is turned on.
If the distance to the walklists is not displaying, please follow these instructions.
Select a list, and then the list will load to your device.
Your location will be shown in a blue spot on the map.
Houses to be canvassed will be shown on the map, but if there are more than 50 addresses in the walklist the houses will not be in an optimized order. If you have a list under 50 the list will be optimized for the shortest distance to walk to canvass all houses, so you can choose to walk from House #1 to House #2 etc or you can pick your own routing through the houses on the list.
Once a walker selects "survey", the campaign's pre-loaded survey flow will display. (Every campaign has a unique survey, so no example shown.)
At the end of each survey, the house that was just knocked will drop off the map. If there's a need to add information to a voter's address that has already been canvassed, (such as they were pulling in as the walker was walking away from the door), simply click resurvey at the upper left hand of your device.